Residential · Colorado Springs, CO
Stucco water damage usually starts small, a hairline crack, failed caulk joint, or missing kick-out flashing, then turns into soft sheathing, stains, and moldy framing. Superior Stucco Colorado Springs has served Colorado Springs since 2019, repairing wet stucco systems correctly from demolition and drying through re-lath, flashing, and color-matched finishes.
We start by locating the moisture source, not just patching the surface. After protecting landscaping and windows, we open the affected areas to inspect the WRB (water-resistive barrier), sheathing, framing, and fasteners, then remove compromised stucco down to sound material. Wet substrates are dried to safe levels with commercial dehumidifiers and air movers, then we rebuild the base with corrosion-resistant lath, weep screed where required, properly shingled Grade D building paper or equivalent WRB, and a new scratch coat and brown coat reinforced with fiberglass mesh at stress points and transitions.
Colorado Springs weather can push water behind stucco through freeze-thaw cycling, wind-driven rain, and ice dams at roof edges, so detailing matters. We correct common failure points like window and door flanges, sill pans, deck ledgers, hose bibs, stucco-to-concrete joints, roof-wall intersections, and missing kick-out flashing, using compatible sealants and metal flashing that sheds water onto the face of the stucco. Once the base is solid, we blend the finish to match your existing texture (sand float, lace, dash, smooth) and apply acrylic finish or cement finish as appropriate, then we fog-coat or color-coat as needed to reduce patch outlines and restore a consistent appearance.
Customers in Colorado Springs choose us because we treat stucco water damage as a building-envelope problem, not a cosmetic repair. You get clear explanations, photos of what we find behind the wall, and a written scope that separates demolition, drying, reconstruction, flashing, and finish work so there are no surprises. As a licensed and insured stucco contractor, we focus on durable assemblies that manage water with proper laps, weeps, and drainage paths, and we work clean with dust control, careful masking, and daily jobsite resets.
Before we call the job complete, we walk the repair area with you and confirm the details that prevent future leaks. You receive a clean tie-in from old to new stucco, corrected penetrations and terminations, and sealed joints where sealant belongs (not as a substitute for flashing). We also provide basic maintenance guidance, what to watch for season to season, where caulk should and should not be used, and how to keep sprinklers and soil from saturating the base. The result is a repaired stucco system that drains and dries properly, plus documentation you can keep for property records or future sale disclosures.
Yes. We provide a free written estimate after an on-site review so the scope reflects access, elevations, and the actual condition of the stucco or EIFS.
Yes. Superior Stucco Colorado Springs is licensed and insured, and we can confirm documentation as part of the project paperwork.
Small repairs can be completed quickly, while full re-stucco depends on square footage, access, demolition, and cure time between coats. After an on-site inspection, we give a realistic schedule based on the specific scope.
Yes. We handle residential exteriors and commercial projects including multifamily, retail, and office properties, with phased scheduling when needed.
Yes. We troubleshoot common water-entry points such as window perimeters, roof-to-wall transitions, decks, and penetrations, then repair stucco and correct flashing and sealant details as required.
Stucco water damage is rarely just a stain or a crack, it is usually a path that lets bulk water reach the WRB, sheathing, or framing. If the leak path stays open, trapped moisture can lead to swollen OSB, rusted lath fasteners, delamination, interior drywall damage, and moldy insulation. Superior Stucco Colorado Springs focuses on diagnosis first, then a repair that restores the drainage plane, reinforces weak transitions, and matches the finish so your exterior looks right and performs correctly.
Most stucco water damage begins at details, not in the field of the wall. Common entry points include failed sealant at windows and doors, missing kick-out flashing at roof terminations, reverse-lapped paper around penetrations, cracks at control joints, and stucco that is buried below grade or splashed constantly by sprinklers. Our process is to open the wall where symptoms show, verify what is wet and what is still sound, and rebuild the assembly so it sheds water outward. That often includes replacing sections of lath, installing or correcting flashings, re-establishing the WRB with proper shingle-style laps, and reapplying scratch and brown coats to the right thickness before the finish coat.
Because moisture can migrate, we do not rush straight to texture. Drying and verification matter, especially when freeze-thaw cycles can expand tiny cracks into bigger pathways. We use moisture readings to guide drying time, then close the wall only after the substrate is stable. Finally, we match existing finish texture and color as closely as possible, and we advise on practical maintenance steps like keeping stucco 6-12 inches above soil, managing downspouts, and inspecting sealant joints annually.
If you suspect stucco water damage, early repair is almost always less invasive and less expensive than waiting for hidden rot. Our team provides a free written estimate, a clear scope of work, and repairs built around correct drainage and flashing details so the problem does not come right back.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Colorado Springs. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
